Skip to content
English
Go to LiteGait.com
  • There are no suggestions because the search field is empty.

How to Enable or Disable Sleep Mode on GKS20 / GKS22

GaitKeeper S20/22 treadmill may automatically go into Sleep Mode after approximately 15 minutes of being idle

Symptoms: 

  • Treadmill console turns off after a long period of not using the treadmill 

  • Console does not turn on unless the power switch is flipped off/on

Step-by-Step Troubleshooting:

To wake the treadmill from sleep mode, remove the safety key and reattach.

To disable or enable sleep mode follow the steps below:

    • The safety key must be detached before beginning the procedure.

    • Access Engineering Mode:

      1. Press and hold STOP, START, and SELECT on the upper console.

      2. While holding these buttons, insert the safety key.

      3. After a few seconds, the display will show: “ENGINEERING MODE MENU, PRESS SELECT”- Press SELECT.

      4. Navigate to Sleep Mode - Use the Up/Down (Fast/Slow) buttons to navigate the menu.

      5. Select FUNCTION, then navigate to SLEEP MODE - Press SELECT.

      6. Change Sleep Mode Setting - Press SELECT to toggle ON or OFF.

      7. Press STOP to return to the menu.

Sleep Mode Settings Explained

Setting

Behavior

ON

In Idle Mode, with no input for 15 minutes, the unit enters sleep mode.

OFF

In Idle Mode, the unit does not enter sleep mode.

Requesting Service Support:

For the Service team to properly assist you with:

    • Equipment Support

    • Warranty Support

Please provide:

    • A clear description of the issues related to the unit. 

    • The treadmill serial number 

 

Contact Information for Support requests: